Regardless of how high quality your trampoline is, it is guaranteed to be destroyed sooner or later. That means you will need to replace the springs.
If that sounds just like your situation right now, this article should help you in many ways. We have tested a variety of trampoline springs, and below are some reviews for the best trampoline springs.
Toward the end of this article, you shall find more information on how to check the quality of the spring, so keep reading.
Table of Contents
- Quick Comparison Chart
- The Best Trampoline Springs Available: My Top 5 Picks
- Different Methods for Checking the Quality of Trampoline Springs
- Bottom line
Quick Comparison Chart
The Best Trampoline Springs Available: My Top 5 Picks
Having to replace your trampoline springs constantly could be a pain. If you don’t want that, you should choose Huouo trampoline springs.
The springs are made out of extremely heavy-duty material to boost its durability. So, you can expect your children to go completely wild on the trampoline for years, and it still wouldn’t break.
The Huouo springs are galvanized and coated with a layer of zinc. That’s why you can use it for a trampoline that is always outside, and there is no need to worry about it rusting.
The most outstanding feature of the Huouo springs is the tapered design. For people who aren’t sure why it matters, here is why.
Tapered design offers better tensile strength, elasticity, ability to stretch, and many more benefits. Tapered design springs are almost impossible to come off the trampoline once they have been installed.
It is a shame that the Huohuo trampoline springs only come in with a length of 5” 5. That means if you have a trampoline that requires springs of a different length, you wouldn’t be able to enjoy these.
Let’s go through some standardized requirements which the ZhenT trampoline springs have before we get to the most outstanding feature.
The ZhenT springs are, once again, galvanized steel springs. This is basically the bare minimum in the industry these days. By the way, that doesn’t mean all springs available for sale are galvanized, so that’s still an advantage.
However, the thing that should be talked about the most would be the advanced tension mechanism design. This design improves the elasticity and stretchability of the springs. It does so by ensuring the coil of the springs is tightly wound together.
We actually tested if there were any changes in the bounciness of the trampoline by measuring how high the testing subjects were bounced up in the air.
Surprisingly, some of the kids did end up reaching higher after we replaced the old springs with the ZhenT springs.
Unfortunately, the ZhenT trampoline springs are only suitable for trampolines only. So, if you were thinking of buying the bunch for trampolines and also other uses, you might have to reconsider.
If we were to compare durability and other relevant aspects, we don’t think the AW trampoline springs would exceed the other springs on this list.
But, what we found out was that the AW springs are extremely suitable for a small and portable trampoline for the following reasons.
They are incredibly easy to install. The AW trampoline springs have two different ends. One is designed to be more curved to hold onto the mating clip better. By doing so, it wouldn’t come out even under heavy bounces.
The other ends are a little less curved, which have been designed to get into the metal frame.
Other than that, the springs are also weather and crack resistant, so you do not have to worry about them breaking in just a few weeks or so.
Sadly, the AW trampoline springs only have a 30-day-warranty. Things always happen, and it is always a mental relief for the customers if the warranty is a bit longer.
Regardless, the AW trampoline springs are perfect for a portable trampoline due to the reasons mentioned above.
The Eurmax trampoline springs are also pretty decent springs that are on par with the winner of this list. In fact, it would have made the top spot if it weren’t for its one and only shortfall.
The Eurmax trampoline springs are, of course, galvanized for weather resistance. And if you would like even more protection, you can also opt for the premium ones with zinc plating. We purchased the premium ones, and they were amazing.
We replaced the springs of a trampoline and left it out in the sun and rain for many days. It looked as good as new after 2 weeks of being exposed to outside weather.
Similar to the winner springs, the Eurmax trampoline springs also have pretty decent elasticity, sturdiness, and a satisfactory score for other criteria.
However, during the test, we found that the hook is not galvanized evenly. So, even though it does have rusting resistance properties, the hook might give in first in the long run.
There are also some other factors, but this is the main reason why it is not in the place of the best springs.
The Upper Bounce trampoline springs should also be considered. The springs are made out of galvanized steel for some resistance properties.
The elasticity and stretchability aren’t bad either, although they are slightly inferior compared to the winner and runner-up springs on this list.
The package also comes with a T-hook for your convenience during the installation.
The thing that is most worth-mentioning about the Upper Bounce trampoline springs is the options available. You probably have noticed that the other springs on this list are only available in one to three different lengths only.
Upper Bounce offers its springs from 4” all the way to 9” long. So, if you couldn’t find a set springs that fit your length, definitely give Upper Bounce a go.
You may also like
However, it is better if you check with the manufacturer before the purchase because some springs might come with a slightly different length.
In short, why is it on our list? That’s because Upper Bounce is the only supplier, which we are aware of, that offers springs in so many different lengths without compromising quality.
Different Methods for Checking the Quality of Trampoline Springs
Testing the quality of your replacement springs isn’t hard at all, as long as you know what you are looking for.
There is actually some science and rationale for the following recommended method, but we won’t go into that now. So, let’s dive right into what to look for, shall we?
Generally, there are three different kinds of tests when it comes to springs for a trampoline.
1. The Compression Test
In this test, we will see how well the springs can retain its original shape when another source is compressing it. Essentially, what you need to do is press the springs down as hard as possible. Alternatively, you can use a heavy object to sit on to see the result.
2. The Extension Test
The extension test would tell you how well the replacement springs can handle being pulled apart.
A good spring should be able to endure being pulled away then revert back to its original shape without much issue. So, you have to pull the spring from both ends to its performance in this category.
3. The Torsion Test
The torsion test is the most overlooked test. While it is important that the coil can handle being pulled and pushed, it is also important that the hook can handle the equivalent pressure too.
Hence, remember also to pay attention to the hook when you run the other tests. It’s preferable if the hook does not turn into another shape at all during the tests.
Apart from the above-mentioned tests, some other aspects would directly contribute to the quality of trampoline springs.
4. The Coating of the Springs
No one really has the time to take the trampoline in and out every day. Once you have bought a trampoline, you will be leaving it outside almost every day. That’s why you should anticipate quite a fair amount of exposure to environmental factors.
As such, a spring with some sort of coating is always preferred. That coat will prevent it from rotting, rusting, and corrosion.
5. The Material of the Springs
Testing the quality of the material of the springs could be difficult if you didn’t have the right equipment.
There is a way to get around it, though. That is to test the contraction and expansion of the springs. If you pull the spring really hard and it does not revert back to its original shape and length, chances are, it is bad.
6. The Wire’s Diameter
It is preferable if the wire has a diameter of at least 3.2mm. The springs might not be able to handle much force If the diameter is less than that.
7. The Length of the Coil
Similar to the diameter, the length of the coil also plays an important part in determining its ability to handle external forces.
A spring with longer external length would always be able to retract better compared to one with shorter external length.
Alright, folks, that’s about it for the article on the best trampoline springs. Of course, there are still a lot more nuances to discuss about this topic. But you probably have read enough to be more knowledgeable than half of the population now.
So, read our reviews on the best picks and choose the one that suits your circumstances.
If you have a specific question, leave it below, and we will get back to you as soon as possible.
My name is Larry Dunn from Dallas Texas and I have a deep passion and love for the trampoline.
With many years of experience in the field of healthcare service, I have decided to start his own website which is about a trampoline.
With this website, I will share his experiences and expertise advices on different factors to consider when deciding whether or not a trampoline is safe for you and your family.